Midmark Ritter M9 D UltraClave Autoclave
Midmark/Ritter M9 Fully Automatic Autoclave. Additional $500.00 for the printer
You may also want to check:
Midmark Ritter M9 D UltraClave Autoclave –
- Fast and easy use for efficient instrument processing
- Reliability and effectiveness for infection control assurance
- Maximum space utilization and a complimentary design for your sterilization area
Today, more than ever, you need reliable and easy to use products from a trusted partner who understands your sterilization needs. The Midmark Ritter M9 UltraClave Autoclave was specifically designed and engineered to meet those needs. The intuitive display and simple prompts help you easily select the cycle you need…whether it is for unwrapped items, pouches, packs or handpieces. Create peace of mind by making the dental market’s leading sterilizers…the Midmark M9 autoclave is your preferred office choice.
Pulse-air Removal Technology
The M9’s Steam-Flush Pressure-Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam autoclave systems, thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilization needs.
Convenience at a Glance
The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Note: Temperature & pressure are not displayed during dry mode.
If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization will not continue until you’ve attended to the unit.
Ease of Draining & Filling
For ease of draining and filling, the M9’s reservoir fill port and drain tube are in the front of the unit, not on top or in back.
Optional Printer Accessory
The M9 printer accessory provides a permanent record of cycle times, temperatures and pressures during a cycle.
Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Exposure Time (3 to 90 minutes), Temperature (230 to 275F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.
Four pre-programmed sterilization cycle controls: Unwrapped (132C or 270F for 3 minutes), Pouches (132C or 270F for 5 minutes), Packs (121C or 250F for 30 minutes), Handpieces (unwrapped and pouched) (132C or 270F for 6 minutes).
Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
Midmark Ritter M11 Autoclave, (New)$6,250.00
Tuttnauer 2540 EK Autoclave, (Refurbished)$2,350.00
Pelton and Crane Validator 10 Autoclave, (Refurbished)$1,550.00
- Out of Stock
Ritter M7 speedclave sterilizer, (Refurbished)$1,450.00
Chemiclave EC5500, (Refurbished)$1,150.00