3M Attest Biological Indicator Incubator 56c

The 3M Attest Biological Indicator Incubator is a system that provides convenient steam sterilization cycle monitoring. This self-contained biological indicator has the ability to reduce the possibility of sample contamination.

Instruction:

• Plug Your Unit into an Outlet
• Let the Unit Sit for Thirty Minutes to Reach Operational Temperature
• (You May Wish to Keep the Unit on to Avoid Warming-up)
• Once the Incubation Period Finishes, Don Safety Gear (Gloves and Glasses)
• Open the Unit Door
• Wait at Least Five-Minutes
• Retrieve the Attest Biological Indicator
• If the Indicator Does Not Reside Within Heat Absorbing Material, Let it Cool Another Ten Minutes Before Crushing
• If the Indicator is Inside of Heat Absorbing Material, Open the Material and Let Stand for Five Minutes Before Removing the Indicator
• (Let it Stand an Additional Ten Minutes and then Crush)
• Place the Incidator into the Unit's Heating Block at an Approximately Forty-Five Degree Angle, with the Cap Extending Above the Block
• Press the Indicator Back to Crush the Phial to Activate
• Press the Indicator Down into the Heating Block
• Make Sure that the Cap Stays Above the Block